View FTR-B3SB012Z-B10_4149502.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MINIature reLaY
2-CONtaCt 1a (FOr sWItCHING sIGNaLs)
Ftr-B3 serIes
roHs compliant
n Features
l
l
l l
l
l
l
l
These are flat type ultra miniature (SMT), 5.20.2mm height (through hole) relays for telecommunication and data networking equipments, made of high heat resistant material, which can support IRS and VPS methods. Ultra slim and light weight with a 5.250.2 mm height and approximately 0.8 g weight, and an 87mm2 mounting area. Most suitable for decreasing size and weight, space saving and high density packaging of equipment. Contact spring has superb high frequency characteristics. High insulation design conforming to the Bellcore, FCC standard, with a minimum of 1.6 mm between coil and contacts insulation distance, an AC 1.5kV coil contact withstand voltage, and a 2.5kV coil-contact withstand surge voltage. High efficieny polar electromagnet structure implements a140mW low coil power consumption. A power saving latch type is also available. Gold-plated silver alloy bifurcated contacts having high contact reliability. UL, CSA recognized. Confirms to IEC 60950, UL1950, EN60950. Spacing & high breakdown voltage (Basic insulation, 150 working volts, pollution degree 2). RoHS compliant since date code: 0431B8 Please see page 10 for more information

n OrDerING INFOrMatION
FTR-B3 (a) Series Name Terminal type Operation function Rated voltage of coil Contact material Relay enclosing direction* Number of relays per reel* G B 012 Z -B (b) (c) (d) (e) (f ) 10 (g FTR-B3 Series
Ftr-B3 series
[Example] (a) (b) (c) (d) (e) (f) (g)
C: through hole G: surface mount S: mounting area, reduced SMT A: standard type B: latching type (1 coil) 1.5: 1.5VDC 003: 3VDC 024: 24VDC 4.5: 012: 4.5VDC 12VDC
Z: gold overlay silver alloy B: standard enclosing direction 10: 1,000 (standard)
Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking FTR-B3GA012Z-B10 B3GA012Z Note: *: - Only surface mount types (G and S) are applicable - All relays are packaged in tubes unles P/N ends with -B10
2

n saFetY staNDarD aND FILe NuMBers
Ftr-B3 series
UL508, 1950 (File No. E63615) C22.2 No. 14, No. 950 (File No. LR40304) Please request when the approval markings are required on the cover.
Nominal voltage 1.5 to 12 VDC 0.5 A 1A 0.3 A Contact rating 125 VAC 30 VDC 110 VDC resistive
n
COIL Data CHart
Rated coil Coil resistance voltage (10%) 1.5VD C 3VD C 4.5VD C 12VD C 24VD C 16. 1 64. 3 14 5 1,02 8 2,50 4 Operating voltage +1.13V +2.25V +3.38V +9.0V +18.0V Release voltage* +0.15V +0.3V +0.45V +1.2V +2.4V Rated power consumption 140mW 140mW 140mW 140mW 230mW
Standard type MODEL FTR-B3( )A1.5Z FTR-B3( )A003Z FTR-B3( )A4.5Z FTR-B3( )A012Z FTR-B3( )A024Z * Pulse driven Note: All values in the table are measured at 20C. Latching type (1 coil) Rated coil Coil resistance voltage (10%) FTR-B3 ( )B1.5Z FTR-B3 ( )B003Z FTR-B3 ( )B4.5Z FTR-B3 ( )B012Z FTR-B3 ( )B024Z * Pulse driven Note: All values in the table are measured at 20C. 1.5VD C 3VD C 4.5VD C 12VD C 24VD C 22. 5 90 20 3 1,44 0 4,80 0 Set voltage +1.13V +2.25V +3.38V +9.0V +18.0V Release voltage* -1.13V -2.25V -3.38V -9.0V -18.0V Rated power consumption 100mW 100mW 100mW 100mW 120mW
3

n speCIFICatIONs
Item Arrangement Contact material Contact type Contact resistance (initial value ) Contact rating Contact Maximum carrying/switching current Maximum switching power Maximum switching voltage Minimum switching load *1 Capacitance Nominal power (at 20 C) Coil Operate power (at 20 C) Operating temperature (no frost) Time Value Operate (at nominal voltage, without bounce) Release (at nominal voltage, without bounce ) Resistance (at 500VDC) between open contacts Dielectric Strength Insulation between adjacent contacts between coil and contacts between open contacts Surge Strength between adjacent contacts between coil and contacts Standard Type FTR-B3 ( ) A 2Form C
Ftr-B3 series
Latching Typ e FTR-B3 ( ) B
Gold overlay silver allo y Bifurcated contacts (cross-bar ) 75 m , maximum at 6VDC 1A 30VDC 1A, 125VAC 0.3A (resistive) 1A 62.5 VA / 30W 250 VAC, 220 VDC 10mVDC, 0.01mA*1 Approximately 0.4pF (between open contacts) Approimately 0.5pF (adjacent contacts) Approximately 1.0pF *1(between coil and contacts) 140m W 80m W -40 C to +85 C 3ms maximu m 3ms maximu m Minimum 1,000 M 1,000 VAC 1 minute 1,000 VAC 1 minute 1,500 VAC 1 minute 1,500V (at 10 x 160s) [FCC Part 68] 1,500V (at 10 x 160s) [FCC Part 68] 1,500V (at 10 x 160s) [FCC Part 68] 2,500V (at 2 x 10s) [Bellcore] 100m W 57m W
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
continued

n speCIFICatIONs
Standard Type FTR-B3 ( ) A
Ftr-B3 series
continued Item Mechanical Life Electrical (resistive load) Vibration Malfunction resistance Endurance Other Malfunction Shock resistance Endurance Weight Latching Type FTR-B3 ( ) B
50 x 106 operations min. (at 3Hz) 20 x 106 operations min.(at 3Hz) 100 x 103 operations min. at 1A 30VDC (at 0.5Hz) 100 x 103 operations min. at 0.3A 125VDC (at 0.5Hz) 10 to 55 Hz at double amplitude of 3.3mm 10 to 55 Hz at double amplitude of 5mm Min. 750 m/s2 Min. 1000 m/s2 Approximately 0.8g
n
CHaraCterIstIC Data
Set, reset time characteristics
5
Nominal Voltage Multiplying Factor (%)
5
Operation (return time characteristics)
100 90 80 70 60 50 40 0.5
Pulse characteristics
4
4
Time (ms)
Time (ms)
3
3
2
2 Set time Reset time
Operation time
At set/reset
1 Release 0 0.1 0.2 0.3
1
0
0.1
0.2
0.3
Coil Power (W)
Coil Power (W)
1
2
5
10
20
50 100 200
Pulse width (ms)
Ambient Temperature
(maximum applied voltage, operating voltage characteristics) 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 20 Latching Type
Ambient Temperature
Nominal Voltage Multiplying Factor (%)
Coil Temperature Rise (C)
2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 20
Standard type Contact carrying current: 0 Co nta cu rre ct nt: ca 1A rryi ng
80
Nominal Voltage Multiplying Factor
Coil Temperature Rise
(maximum applied voltage, operating voltage characteristics)
60
Co cu nta rre ct nt ca : 1 rry A i
in ry ar tc A ac 1 nt nt: Co rre cu
ng
g
40 Contact carrying current: 1A 20 Contact carrying current: 0 0 0 0.1 0.2 0.3
ting Opera il) o (hot c
e voltag
ge
lta ting vo Opera ) l coil (coo
40 60
o ting V Opera ) oil (hot c
ltage
g Voltage Operatin il) (cool co
60 80 100
80
100
Coil Power (W)
Ambient Temperature (C)
40
Ambient Temperature (C)
continued
5

n CHaraCterIstIC Data
Ftr-B3 series
continued
Maximum Switching Power
2 AC Resistive
100 70
Life Curve
Contact Current (A)
1
Operation (x104)
50 40 30 20
30
0.5 DC Resistive 0.3 0.2
VD
C
Re sis
5V 12 DC e tiv sis Re
tiv
e
10
0.1
1
2
5
10
20 30 50
100 200
0
0.2
0.4
0.6
0.8
1.0
1.2
Contact Voltage (V)
Contact Current (A)
n
reFereNCe Data
100
Distribution of Operate and Release Voltage
FTR-B3GA4.5Z n=100 Operate Release
100
Distribution of Operate and Release Voltage
FTR-B3GB4.5Z n=100 Operate Release
Distribution of Operate and Release Time
100 FTR-B3GA4.5Z n=100 Operate Release
Distribution (%)
Distribution (%)
60
60
Distribution (%)
80
80
80
80
60
40
40
40
20
20
20
Nominal Voltage Multiplying Factor (%)
0
10
20
30
40
50
60
70
80
0
10
20
30
40
50
60
70
Nominal Voltage Multiplying Factor (%)
0
1
Time (ms)
2
3
4
5
Distribution of Bounce Time
100 FTR-B3GA4.5Z N=100 Operate Release
Distribution of Contact Resistance
80 FTR-B3GA4.5Z n=100 Make Break
Contact Resistance (m)
100
Mechanical Life Test
100 80 60 40 20 0 500 100 50 10 5 100 Initial Operating Voltage
Distribution (%)
Distribution (%)
80
60
60
Release Voltage FTR-B3GA4.5Z n=8 1200 operations/min. Make Break 500 1000 2000 3000 5000
40
40
20
20
0
1
2
3
4
5
0
Time (ms)
Contact Resistance (m)
20
40
60
80
100
Operation (x104)
continued
6

n speCIFICatIONs
continued
Ftr-B3 series
Nominal Voltage Nominal Voltage Multiplying Factor (%) Multiplying Factor (%)
Nominal Voltage Multiplying Factor (%)
Nominal Voltage Multiplying Factor (%)
100 80 60 40 20 0 500 100 50 10 5 1 Initial
Electrical Life Test
Operating Voltage Release Voltage FTR-B3GA4.5Z n=8 30 operations/min. 126 VAC 0.3 A (resistive load) Make Break 10
100 80 60 40 20
Electrical Life Test
Operating Voltage Release Voltage FTR-B3GA4.5Z n=8 30 operations/min. 30 VAC 1A (resistive load) Make Break Initial 10
20 10 0
Magnetic Interference
FTR-B3GA4.5Z n=4 Operating Voltage Standard type
-10 -20 20 10 0 Release Voltage When coil is ON When coil is OFF
Contact Resistance (m)
Contact Resistance (m)
0 500 100 50 10 5 1
-10 -20 0 2
Operation (x104)
Operation (x104)
Distance between relays I (mm)
FTR-B3GA4.5Z n=2
4
6
8
10
Nominal Voltage Nominal Voltage Multiplying Factor (%) Multiplying Factor (%)
20 10 0
Magnetic Interference
FTR-B3GA4.5Z n=4 Operating Voltage
Standard type
High Frequency Characteristics
150 FTR-B3GA4.5Z n=2
High Frequency Characteristics
1.8 1.6
Insertion Loss (dB)
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1 3 5 7 10 30 50 70 100 300 500700 1000
-10 -20 20 10 0
100
-10 -20 0 2
Release Voltage
When coil is ON When coil is OFF
Isolation (dB)
50
n
DIMeNsIONs
Distance between relays I (mm)
4
6
8
10
0
1
3 5 7 10
Frequency (MHz)
30 50 70 100
300 500 700 1000
Frequency (MHz)
FTR-B3C( )( )( )
lDimensions
10.6
0.2
7.2
0.2
0.5 0.05
0.4 +0.2
(1.5) 3.2 0.2 2.2
0.2
2.2
0.2
5.080.2
l Mounting Pad (TOP VIEW)
8-O 0.85
l Wiring Diagram (TOP VIEW)
(-) 8
7
6
5.0 8
1 (+)
3.2 2.2 2.2
2
3.5 +0.3 -0.2
5 3 4 Marking (Coil side indication)
5.2 0.02
Unit: mm
7

n DIMeNsIONs
lDimensions
10.6
0.2
Ftr-B3 series
FTR-B3G( )( )( )
7.2
0.2
0.2 +0.2
0.4 +0.2
(1.5) 3.2 0.2 2.2
0.2
2.2
0.2
5.080.2 8.2 +0.5 -0.3
l Mounting Pad (TOP VIEW)
2.56
0.8
0.8
0.8
0.8
l Wiring Diagram (-) (TOP VIEW) 8
7
6
5
6.64
3.2
2.2
2.2
1 2 3 (+) Marking (Coil side indication)
2.56
4
5.45 +0
1.05
Unit: mm
FTR-B3S( )( )( )
10.6
0.2
lDimensions
7.2
0.2
0.2 +0.2
0.4 +0.2
(1.5) 3.2 0.2 2.2
0.2
2.2
0.2
l Mounting Pad (TOP VIEW)
0.8 0.8 0.8 0.8
l Wiring Diagram (TOP VIEW)
5.080.2 7.2 +0.5 -0.3
(-) 8
7
6
5
2.08
6.14
2.08
1 (+)
3.2 2.2 2.2
2
3
4
Marking (Coil side indication)
5.45 +0
1.05
Unit: mm
8

n paCKaGING speCIFICatIONs
l packaging Method - Packaging Standard: JIS C 0806 - Taping Type: TB 1612 - Reel Type: R16D - Quantity of 1reel: 1000 pieces
Ftr-B3 series
l Packaging Orientation Code:B
Orientation mark side
Feeding
l (2) Dimensions - Reel dimensions
l Tape Dimensions
Top cover tape
Embossed carrier tape
Unit: mm Note: Relays are sold in packs of 1000 pieces, please order 1000 pieces as one unit.
n reCOMMeNDeD sOLDerING CONDItIONs (teMperature prOFILe)
IRS (Infrared Reflow Soldering) VPS (Vapor Phase Soldering)
Temperature (C)
T3 T2 T preheating
T 3= 245C max. T 2= 200C max. cooling T= 165C max.
Temperature (C)
soldering
T3 T2 T
215C maximum soldering cooling preheating
T 3= 200C maximum T 2= 165C maximum T= 100C maximum
0
120 sec maximum
30 sec Max.
0 60 sec Max.
60 sec Max. 90 sec Max.
Note: 1.Temperature profiles show the temperature of PC board surface. 2.Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method.
n
preCautIONs
- For details on general precautions, refer to the section on technical descriptions. - Since this is a polar relay, follow the instructions of the internal wiring diagram for the +- connections of the coil. - Note that the terminal array and internal wiring of the surface mount relay are a top view
9

Ftr-B3 series
roHs Compliance and Lead Free relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0CU-Ni will be used for the FTR-B3 and FTR-B4 series relays. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l "LF" is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu amd Sm-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005.
Reflow Solder condtion
PeakTemp.: max. 250C 250 temperature (C) 220 Pre-heating Cooling Soldering
Flow Solder condtion:
Pre-heating: Soldering:
maximum 120C dip within 5 sec. at 260C soler bath
Solder by Soldering Iron:
170 130
Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec.
90~120 sec. max. 120 sec.
20~30 sec. (duration)
We highly recommend that you confirm your actual solder conditions
3. Moisture sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys. SnAgCu and SnCuNi solder is known as low risk of tin whisker. No considerable length whisker was found by our in-house test.
10
4. tin Whisker
l

Fujitsu Components International Headquarter Offices
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and south america Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/relays/
Ftr-B3 series
europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/
(c)2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. February 15, 2007

▲Up To Search▲

Price & Availability of FTR-B3SB012Z-B10

	To Download FTR-B3SB012Z-B10 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .